logo
Envoyer le message
Demande de soumission |
Aperçu Produitskits de joint de cylindre hydraulique

7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit

Tous les produits

kits de joint de cylindre hydraulique

(562)

Kit de joint de pompe hydraulique

(115)

Kit de joint de moteur hydraulique

(34)

Kits de joint

(503)

Kit de joint de briseur

(37)

Kit de joint de soupape de commande

(48)

Kit commun de joint de centre

(33)

Kit de joint de moteur de voyage

(18)

Kit de joint de moteur d'oscillation

(14)

Kit de joint d'huile hydraulique

(257)

Joints anti-poussière

(158)

joints de joint circulaire

(154)
Les Meilleurs Produits
Les États membres peuvent prévoir des mesures d'accompagnement en ce qui concerne la mise en œuvre des mesures de prévention et de lutte contre les épidémies.

Les États membres peuvent prévoir des mesures d'accompagnement en ce qui concerne la mise en œuvre des mesures de prévention et de lutte contre les épidémies.

Le produit doit être présenté sous forme d'un ensemble d'étiquettes.

Le produit doit être présenté sous forme d'un ensemble d'étiquettes.

Les États membres peuvent prévoir des mesures d'accompagnement en ce qui concerne la mise en œuvre de la présente directive.

Les États membres peuvent prévoir des mesures d'accompagnement en ce qui concerne la mise en œuvre de la présente directive.

Je suis en ligne une discussion en ligne

7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit

7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit
7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit 7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit

Image Grand :  7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit

Détails sur le produit:
Lieu d'origine: CHINE
Certification: ISO9001
Numéro de modèle: Kit hydraulique de joint d'excavatrice de cylindre de seau de bras de boom de 7079974200 7079943
Conditions de paiement et expédition:
Quantité de commande min: 20
Prix: Négociable
Détails d'emballage: PP Sac à l'intérieur, boîte de carton à l'extérieur
Délai de livraison: Dans les 3 à 15 jours suivant la réception de votre dépôt
Conditions de paiement: L / C, T / T, Western Union, Moneygram
Capacité d'approvisionnement: 3000
Contact

7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit

description de
Application: autres véhicules à moteur à combustion Détail du package: Sac ou boîte
ODM: Disponible Garantie: 1 an
Quantité: 15 pièces Installation: Facile à installer
L'anneau des étoiles: A-8501 Résistance à la pression: Oui
Style: O RING Modèle: faire une demande de 312D
Méthode d'expédition: par mer, par air, par express Pression: jusqu'à 690 bar ((10000 psi)
Performance: Excellente capacité de scellement Entretien: Faible
COMPATIBILITÉ: Adapte à la plupart des cylindres hydrauliques standard
Mettre en évidence:

hydraulic cylinder seal kit excavator

,

boom arm bucket cylinder seal kit

,

excavator hydraulic seal kit with warranty

7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit

For maintenance teams and fleet managers responsible for maintaining the operational efficiency of EXCAVATOR loaders in construction sites, coal mining areas, and large - scale farmland reclamation projects—where the Hydraulic Boom Arm Bucket systems undertake heavy - duty tasks such as lifting construction materials, breaking hard rocks, and transporting bulk ores—the reliability of the Hydraulic Cylinder system is of utmost importance. Unlike ordinary hydraulic parts, the Hydraulic Boom Arm Bucket requires coordinated and high - pressure operations: the arm stretches to reach remote construction points, the boom lifts payloads ranging from 15 to 45 tons (such as concrete blocks and coal), and the bucket tightly grips materials with accurate clamping force. Every day, these systems operate in harsh environments filled with construction waste: they collide with concrete structures, accumulate coarse sand from the ground, and are exposed to heavy rain, mining lubricants, and extreme temperature changes, from -30°C (frozen construction sites in winter) to 170°C (high - temperature hydraulic oil heated by the engine). All these harsh working conditions rely on the leak - proof performance of the Hydraulic Boom Arm Bucket Cylinder. Once the seals fail, the entire EXCAVATOR loader will stop working. This not only leads to project delays but also increases costs due to emergency maintenance and wasted hydraulic oil, and even poses a risk of damaging the cylinder rod due to lack of protection. To avoid such problems, the Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit (part numbers 7079974200, 7079943110, 707 - 99 - 74200, 707 - 99 - 43110) is the key solution. It forms a professional and leak - tight seal suitable for the movements of the Hydraulic Boom Arm Bucket, ensuring stable hydraulic pressure for the smooth extension of the arm, lifting of the boom, and clamping of the bucket—while also effectively resisting the unique debris and pressure faced by these systems.​
Correct part numbers are essential to ensure compatibility with the Hydraulic Boom Arm Bucket cylinder seals of EXCAVATOR loaders, as these systems have specific dimensional and pressure requirements (for example, the boom cylinder needs to withstand higher pressure than the ordinary transmission cylinder). The 7079974200 (written with hyphens as 707 - 99 - 74200) and 7079943110 (written with hyphens as 707 - 99 - 43110) serve as reliable references for maintenance technicians and procurement personnel. They confirm that the seal kit meets the exact rod diameter (90–240mm), pressure range (3,200–5,200 psi), and material standards of the Hydraulic Boom Arm Bucket cylinder, rather than being generic hydraulic components. It is worth noting that 707 - 99 - 74200 and 707 - 99 - 43110 are included in global parts management systems (such as Volvo and Hitachi inventory databases), which is crucial for avoiding ordering mistakes. If a wrong seal kit (for example, one designed for the transmission cylinder) is used on the boom cylinder, it will fail within a few hours, resulting in the EXCAVATOR loader being out of service for 4–6 days and causing downtime losses of ​
13,000.​
In actual procurement scenarios—whether searching on e - commerce platforms (such as Amazon, Alibaba), checking warehouse inventory records, or negotiating with local suppliers—part numbers like 7079974200 and 7079943110 may appear in both hyphenated (707 - 99 - 74200, 707 - 99 - 43110) and non - hyphenated forms. This flexibility is designed to adapt to different inventory management systems: local hardware stores may list 707 - 99 - 74200 for quick over - the - counter sales, while international suppliers use 7079974200 for cross - border transactions. Importantly, these part numbers specifically identify the Hydraulic Boom Arm Bucket seal kit and are never used for bulldozer rippers or excavator auger attachments, ensuring that technicians purchase the correct product. For instance, a construction company in South Africa searching for "boom cylinder seals for large excavators" will find that 7079943110 (or 707 - 99 - 43110) is directly associated with EXCAVATOR loader models such as Komatsu PC400 and Caterpillar 349, confirming that it is compatible with the 35 - ton lifting capacity of their buckets. Regardless of the format, 7079974200 and 7079943110 guarantee that the seal kit is engineered to withstand the pressure of the Hydraulic Boom Arm Bucket: it resists deformation during boom lifting, blocks gravel from entering the gaps of the arm cylinder, and maintains flexibility during the repeated opening and closing of the bucket.

7079974200 7079943110 707-99-74200 707-99-43110 Hydraulic Boom Arm Bucket Cylinder Excavator Seal Kit 0

Produit Tag:

Joints d'huile de cylindre hydraulique ZAX240,

Kit de joint de soupape de commande PC200,

Kits de joints de cylindre hydraulique Komatsu

Coordonnées
Jiangsu Runfeng Jiu Seals Co., Ltd.

Personne à contacter: SUNNY

Téléphone: 86 18605253464

Envoyez votre demande directement à nous (0 / 3000)

À propos

kits de joint de cylindre hydraulique

180 pièces de rechange de Seal Kit Hydraulic Cylinder Oil Seals d'excavatrice de joint de seau de bras du boom MS110 120 grondent joint de seau de bras

2384462 2465916 DIRECTION de l'ASCENSEUR TIFT pour le joint de cylindre hydraulique de chargeur

Pièces de seau de bras de perche de kits de joint de cylindre hydraulique d'E307 E308 E70

Kit de joint de pompe hydraulique

8C5163 9X7326 8T6923 6E0307 1293712 8C5157 6E0253 1080125 1393706 8T1797 8C5160 1086211 1293709 1214185 1301857 0996998

Kit de joint de pompe à haute pression HPV35 HPV55 NBR PTFE PU matériel

Kit hydraulique PC120 PC130 PC120 de joint de pompe à engrenages HPV55 pour l'excavatrice

LAISSEZ UN MESSAGE

Politique de confidentialité | LA CHINE Bon Qualité kits de joint de cylindre hydraulique Fournisseur. © 2022 - 2025 Jiangsu Runfeng Jiu Seals Co., Ltd.. All Rights Reserved.